Iluka Sea Minerals by Lo-Chlor
Elevate
Raises alkalinity and pH
Raises total alkalinity and pH when a test shows them low.
When: As required, after testing.
$13.95inc GST, 500 g
Orders open soon.
Your cart stays saved on this device. Leave your email for the day orders open.
Also in the Iluka Start-Up Kit ($149.95).
About Elevate
Elevate increases Total Alkalinity and pH in spa and hot tub water. The lack of buffering that occurs if the Total Alkalinity is too low will cause the pH to fluctuate significantly. Water low in Total Alkalinity will shorten the life of equipment in your spa and may also make water uncomfortable for bathers either in aggressive fuming or skin irritation.
Directions
- pH should be maintained in the range of 7.2 to 7.6.
- Total Alkalinity should be maintained between 125ppm and 150ppm.
- It is recommended that your spa water is tested prior to adding Descend or Elevate.
- Always adjust the Total Alkalinity before adjusting the pH.
Product facts
- Sizes
- 500 g (Lo-Chlor ASI-EV500, barcode 9312113022963, carton of 12)
- Active constituent
- Sodium bicarbonate 1000 g/kg
- When
- As required, after testing
- Hazard classification
- Not classified as hazardous
- Dangerous goods
- No (not a dangerous good for road, sea or air)
- Safety data sheet
- Lo-Chlor, revision February 2021
Read the label and the safety data sheet (PDF) before use. Poisons Information Centre 13 11 26.
